开关电源

S-50 Series

low price and high reliability 105 output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With short-circuit and owwerload protection Compact size, light weight 100% full-load burning test Installed with EMI filter, minimum wave
Item NO. /Specifications				S-50-5	S-50-12	S-50-15	S-50-24
DC output voltage				5V	12V	15V	24V
Output voltage error(Note: 2)				2%	1%	1%	1%
Rated output current				10A	4.2A	3.4A	2.1A
Output current rage				0-10A	0-4.2A	0-3.4A	0-2.1A
Wave and noise (Note: 3)				75mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability (Note: 4)				0.5%	0.5%	0.5%	0.5%
Load stability (Note: 5)				1%	0.5%	0.5%	0.5%
DC output power				50W	50.4W	51W	50.4W
Efficiency				71%	78%	78%	82%
Adjustable range for DC voltage				+10,-5%	10%	10%	10%
AC input voltage range				85~132VAC/170~264VAC selected by switch 47~63Hz;240~370VDC
Input current				1.3A/115V 0.65A/230V
AC Inrush current				Cold-start current 18A/115V 36A/230V
Leakage current				<0.5mA/240VAC
Overload proctection				105%~150% Type: Foldback: current limiting reset: auto recovery
Over-voltage protection
High-temperature protection
Temperature coefficient				0.03%(0~50)
Setup rise hold up time				200ms, 100ms, 30ms
Vibration				10~500Hz, 2G 10min,/1 cycle, Period for 60min, Each axes
Withstand voltage				Input and output internal: 1.5KvAC, Input and enclosure: 1.5KvAC, Output and enclosure: 0.5KvAC
Isolation resistance				Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100M
Working temperature and hunmidity				-10~+60(Refer to output derating curve), 20%~90%RH
Store temperature and humidity				-20℃~+85℃, 10%~95%RH
Overall dimension				1599738mm
Weight				0.5Kgs
Safety standards				Meet UL 1012 reqirement (Not apply for the mark)
EMC standards				Meet FCC PART15J Conduction class B
				Note:1. The testing condition for the paramenter above is: 230VAC input, rated load, 25 70% RH.Humidity. 2. Error.include the setting error,line stability and load stability.(Note:5) 3. Wave test: adopting"A12" double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%.

[上一页] [下一页] [回首页]