开关电源

S-100 Serie

low price and high reliability 105 output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effecticly With short-circuit and owwerload protection Compact size, light weight 100% full-load burning test Installed with EMI filter, minimum wave
Item NO. /Specifications				S-100-3	S-100-5	S-100-7.5	S-100-12	S-100-15	S-100-24	S-100-27	S-100-48
DC output voltage				3V	5V	7.5V	12V	15V	24V	27V	48V
Output voltage error(Note: 2)				2%	2%	1%	1%	1%	1%	1%	1%
Rated output current				20A	20A	13.6A	8.5A	6.7A	4.5A	3.7A	2A
Output current rage				0-20A	0-20A	0-13.6A	0-8.5A	0-6.7A	0-4.5A	0-3.7A	0-2A
Wave and noise (Note: 3)				75mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability (Note: 4)				0.5%	0.5%	0.5%	0.3%	0.3%	0.2%	0.2%	0.2%
Load stability (Note: 5)				0.5%	0.5%	0.5%	0.3%	0.3%	0.2%	0.2%	0.2%
DC output power				60W	100W	102W	102W	100.5W	108W	99.9W	96W
Efficiency				70%	78%	80%	81%	81%	84%	84%	84%
Adjustable range for DC voltage				2.85-3.3V	4.75-5.5V	6.75-8.25V	10.8-13.2V	13.5-16.5V	21.6-26.4V	26-32V	43.2-52.8V
AC input voltage range				85~132VAC/180~264VAC selected by switch 47~63Hz; 240~370VDC
Input current				2.4A/115V 1.2A/230V
AC Inrush current				Cold-start current 30A/115V 60A/230V
Leakage current				<1mA/240VAC
Overload proctection				105~150%	105~150%	150~200%	105~150%	105~150%	105~150%	105~150%	105~150%
				Type: Output shutdown Reset: Recycle AC ON/OFF
Over-voltage protection
High-temperature protection
Temperature coefficient				0.03%/(0~50)
Setup rise hold up time				200ms, 50ms, 20ms
Vibration				10~500Hz, 2G 10min,/1 cycle, Period for 60min, Each axes
Withstand voltage				Input and output internal: 1.5KvAC, Input and enclosure: 1.5KvAC, Output and enclosure: 0.5KvAC
Isolation resistance				Input and output internal: Input and enclosure, Output and enclosure: 500VDC/100M
Working temperature and hunmidity				-10~+60(Refer to output derating curve), 20%~90%RH
Store temperature and humidity				-20℃~+85℃, 10%~95%RH
Overall dimension				1999838mm
Weight				0.65Kgs
Safety standards				Meet UL 1012 requirement (Not apply for the mark)
EMC standards				Meet FCC PART15J Conduction class B
				Note:1. The testing condition for the paramenter above is: 230VAC input, rated load, 25 70% RH.Humidity. 2. Error.include the setting error,line stability and load stability.(Note:5) 3. Wave test: adopting"A12" double wire for 20MHz, and 0.1 UF&47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to 100%.

[上一页] [下一页] [回首页]